|
Post by Tim-WT on Nov 11, 2012 18:37:07 GMT -6
Below is a list of parts i need for the Yamaha DT 175 "Club Tractor". As mentioned in the build thread this is going to be a loaner Chadwick bike so i'm trying to do this as cheaply as possible. I'll update this thread as i figure out more things needed. For now we are looking for: Petcock - round stile (I assume 22mm) Chain - Used but serviceable condition.
|
|
|
Post by greaser on Nov 11, 2012 18:41:44 GMT -6
What kind of handlebars do you want?
|
|
|
Post by Tim-WT on Nov 11, 2012 18:46:14 GMT -6
Anything motocross like.
|
|
|
Post by greaser on Nov 11, 2012 19:01:38 GMT -6
let me see what I can do :-)
|
|
|
Post by Tim-WT on Nov 11, 2012 19:03:09 GMT -6
Cool! I have a flat (drag bar) i can trade if you can use it.
|
|
Seth M
Classic Rider
Posts: 93
|
Post by Seth M on Nov 11, 2012 20:51:46 GMT -6
What size chain do u need
|
|
|
Post by Tim-WT on Nov 18, 2012 16:19:19 GMT -6
What size chain do u need Sorry, forgot to answer this. Book says 118 links.
|
|
|
Post by Tim-WT on Apr 17, 2013 6:49:16 GMT -6
Dave has found more parts needed:
Air Filter Petcock Oil pump cable Fuel lines etc
We will continue to update as we go.
|
|
|
Post by enduro360son on Apr 17, 2013 7:00:29 GMT -6
If you can't get the cables from Motion Pro or Sudco try Dave at Pobit's Garage in Minneapolis.
|
|
|
Post by Hedorah on Apr 17, 2013 11:08:53 GMT -6
You are welcome to handlebars, petcock and chain I removed from the KLR. I think the chain is serviceable, but it will need a master link.
|
|
|
Post by woahblackbetty on Apr 17, 2013 11:21:57 GMT -6
You are welcome to handlebars, petcock and chain I removed from the KLR. I think the chain is serviceable, but it will need a master link. Thanks!! Bars & petcock should work, chain pitch I believe is different. the DT175 shows a 428 pitch chain
|
|
|
Post by Doc on Apr 17, 2013 19:43:34 GMT -6
I've got a 428 X 112 on my old CM200. Might even have a few of the other links, but I don't think you'd want to run a chain with 2 master links in it!
|
|
|
Post by woahblackbetty on Apr 17, 2013 19:45:51 GMT -6
I've got a 428 X 112 on my old CM200. Might even have a few of the other links, but I don't think you'd want to run a chain with 2 master links in it! Gotta be better than 3?
|
|
|
Post by Doc on Apr 17, 2013 20:03:39 GMT -6
I'll take a look tomorrow to see if I have the other pieces.
|
|
|
Post by Doc on Apr 17, 2013 22:11:23 GMT -6
I'll take a look tomorrow to see if I have the other pieces. Looked through some old tool boxes and storage stuff and didn't find anything. Honestly, man? I'd just get a new chain. Parts Unlimited 428 HD chain in whatever length you need it is about 18 bucks. That's really very cheap.
|
|