|
Post by cheapskate on Jun 18, 2013 12:19:47 GMT -6
The little rubber bushings that go on the fork end/front of the fuel tank on my CT1 where it slides into the frame. I only need 1. Anybody?
|
|
|
Post by woahblackbetty on Jun 18, 2013 12:42:20 GMT -6
|
|
|
Post by cheapskate on Jun 18, 2013 14:54:54 GMT -6
Good price, high shipping.
|
|
|
Post by woahblackbetty on Jun 18, 2013 15:49:59 GMT -6
True... You need to hook in with someone else who is buying something at the same time Or wrap that boss in foam & electrical tape
|
|
|
Post by cheapskate on Jun 18, 2013 15:54:06 GMT -6
True... You need to hook in with someone else who is buying something at the same time Or wrap that boss in foam & electrical tape I found a 2 pack on Ebay for $12 shipped. Foam and tape isn't a bad idea.
|
|
|
Post by weekendrider on Jun 20, 2013 10:53:19 GMT -6
I have a couple from an XS650 you are welcome to. Fitment will be up to you to decide. I'll check the thread for a reply the 21st and 22nd. No phone right now it is on a rice bed. . . . hopefully drying to a workable condition.
|
|
|
Post by cheapskate on Jun 21, 2013 22:27:14 GMT -6
Game on weekendrider!!! I'll sure try them! If I remember, I will measure the one I have on my way through the garage in the morning.
|
|
|
Post by weekendrider on Jun 22, 2013 9:52:54 GMT -6
Great. The one I have has a 7/8 hole and an out side diameter of 1 3/4 inchs. I'm up by Pleasant Hope if you want to come up to get it or I work evenings in Springfield and could bring it to town with me or I could leave it by a mile marker post on 65 anywhere between the truck stop north of Fair Grove to the 60 west get off.
I will be on a tractor most of today. We may come in for supper tonight depending on how tired we are.
Let me know what is easy for you.
|
|
|
Post by cheapskate on Jun 25, 2013 14:56:19 GMT -6
I completely forgot to measure the one I have the past couple days. I'll try to remember tonight and post it up here. It'll be around 9pm.
|
|
|
Post by cheapskate on Jun 25, 2013 20:45:23 GMT -6
Weekendrider,
The one I have measured out to the exact same dimensions as yours.
|
|
|
Post by woahblackbetty on Jun 25, 2013 21:45:46 GMT -6
Winner winner, Chicken dinner!!
|
|
|
Post by weekendrider on Jun 27, 2013 8:56:59 GMT -6
Then you need my orphan. How do we make that happen?
|
|
|
Post by cheapskate on Jun 29, 2013 7:34:11 GMT -6
Then you need my orphan. How do we make that happen? As of today, this is my last week working at Oreillys. I work Saturday-Tuesday. Starting Wednesday the 3rd of July, I will be full time where Dave works. Just let me know where you want to meet or something and I'll see when will work.
|
|
|
Post by weekendrider on Jun 29, 2013 16:16:02 GMT -6
Which O'Reillys? Maybe it would be on my way to somewhere. I was thinking of dropping in on the swap thing at Yamaha tomorrow.
|
|
|
Post by woahblackbetty on Jun 30, 2013 7:53:10 GMT -6
Starting Wednesday the 3rd of July, I will be full time where Dave works hangs out during the week. Fixed it for you!
|
|