|
Post by rustnpeace on Aug 29, 2014 22:55:42 GMT -6
Does anyone have a tank for my cb750 or a different tank that will fit?
|
|
|
Post by Tim-WT on Aug 30, 2014 13:03:52 GMT -6
I have one off of a CB 500 T. No idea if it will fit but you are welcome to try it out.
|
|
|
Post by rustnpeace on Sept 1, 2014 22:27:20 GMT -6
![](http://i1264.photobucket.com/albums/jj484/rustnpeace/Mobile%20Uploads/20140828_190939_zps545cfdb9.jpg) Tim I am not sure if it will fit or not, my frame rails are wide, 6 3/4" is needed to clear them. I have a cb 350 tank I got a while back that is close, I just hate to cut a good tank.
|
|
midwestgl500
Classic Rider
![*](//storage.proboards.com/forum/images/stars/star_blue.png) ![*](//storage.proboards.com/forum/images/stars/star_blue.png)
Awe colder weather already...
Posts: 51
|
Post by midwestgl500 on Sept 4, 2014 11:01:42 GMT -6
Couple of brothers up the street with probably 6-7 750's all around there houses. I can swing by and see if they would sell a tank if you would like.
|
|
|
Post by rustnpeace on Sept 4, 2014 17:06:44 GMT -6
Couple of brothers up the street with probably 6-7 750's all around there houses. I can swing by and see if they would sell a tank if you would like. That would be great, Thanks man.
|
|
|
Post by Tim-WT on Sept 6, 2014 9:48:22 GMT -6
|
|
|
Post by rustnpeace on Sept 6, 2014 11:48:11 GMT -6
![](http://i1264.photobucket.com/albums/jj484/rustnpeace/Mobile%20Uploads/20140906_124117_zpseeda650d.jpg) ![](http://i1264.photobucket.com/albums/jj484/rustnpeace/Mobile%20Uploads/20140906_124155_zps666dda77.jpg) It is to narrow towards the back of the tank I'd either have to cut the tank or my frame rails. Thats the issue I'm running into with this tank.
|
|
|
Post by Tim-WT on Sept 6, 2014 12:46:12 GMT -6
In my first picture you can see that tightest measurement is at the 14" point. It widens out quite a bit at the end where your frame comes together. And is a good bit longer than a 350 tank (i think). Also, If you get stumped i have a tank form a Kawasaki 650 that might work as well. Anything we can do, just let me know. ![:)](//storage.proboards.com/forum/images/smiley/smiley.png)
|
|
|
Post by rustnpeace on Sept 6, 2014 13:00:55 GMT -6
In my first picture you can see that tightest measurement is at the 14" point. It widens out quite a bit at the end where your frame comes together. And is a good bit longer than a 350 tank (i think). Also, If you get stumped i have a tank form a Kawasaki 650 that might work as well. Anything we can do, just let me know. ![:)](//storage.proboards.com/forum/images/smiley/smiley.png) I might just have to see the tanks or try them on. It's hard to say. Will you guys be having coffee this weekend.
|
|
midwestgl500
Classic Rider
![*](//storage.proboards.com/forum/images/stars/star_blue.png) ![*](//storage.proboards.com/forum/images/stars/star_blue.png)
Awe colder weather already...
Posts: 51
|
Post by midwestgl500 on Sept 7, 2014 4:01:30 GMT -6
Stopped by on my way to work to ask the neighbor about a tank. They only have one worth using and they are using it on the bike there building now. The other 2 are pretty bad. Like holes bad lol
|
|
|
Post by rustnpeace on Sept 7, 2014 9:31:00 GMT -6
Stopped by on my way to work to ask the neighbor about a tank. They only have one worth using and they are using it on the bike there building now. The other 2 are pretty bad. Like holes bad lol OK man, thank you for doing that. I'm starting my bike with a Pepsi bottle right now to try to tune it before I put it on boost, that way I know it runs good and I can go from there for tuning for the turbo.
|
|