Hardtails, barebones wiring, etc

[bobbed750]

I dont think I'll be taking any more full builds on for customers for a while, Its too time consuming. I will on the other hand offer you guys a special rate for other work.

I seem to be getting a plethora of inquiry's on barebones wiring bikes.

I typically charge 150-200 to completely rewire a bike, but i will extend the offer to you guys for 100.00 for minimum wiring (your bike will start, run, charge and have a headlight (high/low) and taillight, brake light) using stock controls, or customer supplied buttons/switches

(I can get a great deal on switches and buttons and such)

Hardtails using your stock axle plates (chopped off your swingarm and reworked) will be 250.00 installed, frame must be bare when I receive it for that price.

can also do other Misc fab work.

Direct email is the best way to reach me [e-mail]

[Tim-WT]

Price list looks very reasonable.

Still love the fab work you did for me!

[copperhead2959]

would you be able to make a manual cam chain tensioner? i cant find one for my bike its an 81 kz750 and i can only find them for 83-85 and 79 previous years.

[bobbed750]

Is your bike a twin or a four cylinder? What is wrong with your tensioner?

[copperhead2959]

its a 4 and its the stock auto tensioner its just worn out, apparently they were prone to breakage/premature wear on kz bikes but mine did good for the past 30 years.lol.

[bobbed750]

Ill see what I can come up with for you brother

[brad]

I'll also see if I can get some specs and see if it's something that could be done on the water jet.

[Tim-WT]

So it looks like i need to replace the field coil on the XS400. Would you be able to do that?

Would you happen to have one in your stash of xs parts?

[copperhead2959]

hey thanks guys i wont be riding till i get it replaced. getting tired of not being able to ride, i might have to buy a car

[bobbed750]

Tim, I have one that ohms out as a good coil. 80.00 installed.
Came off a 4200 mile bike.

[Tim-WT]

U gots a deal bro!

It may need a regulated as well. Basically the charging system is not working as it should.

When!

[bobbed750]

If you could drop it off Thursday I could have back to you Friday or Saturday.
I also have a good regulator.

[Tim-WT]

Very cool. Consider your thursday reserved.

Same place as before?

[copperhead2959]

hey after 4 days of searching and i mean hours on end(yes i am that much of a hermit) i finally found it, i had to go to a racing website(one of the dozens i looked through) but finally found it!!!!! i should be out riding in 3-5 business days. can i get a boo-yah?!

on a side note, for a little hunk o' steel those things are expensive.

[bobbed750]

Yessir, Just shoot me a text before heading my way.