|
|
Post by Ratdog472 on Aug 18, 2012 20:15:39 GMT -6
Well i made the leap into another old bike and could use a little help. When I try to get the bike running it will start and run a bit but it will stall out when revved. When on choke I am able to get it running but only briefly.
Does anyone have experience with these bikes that could lend a hand?
|
|
|
|
Post by Doc on Aug 18, 2012 20:42:55 GMT -6
Did you clean out the carbs? Sounds like the idle jet might be okay, but the main jet is blocked or gummed up.
|
|
|
|
Post by Ratdog472 on Aug 18, 2012 20:45:50 GMT -6
I have had it where I can rev it up quite a bit but it has onlt been a couple times. I am also getting a little leakage.
|
|
|
|
Post by brad on Aug 18, 2012 21:39:39 GMT -6
Bring me the carbs
|
|
|
|
Post by Ratdog472 on Aug 18, 2012 22:11:43 GMT -6
Where are you at?
|
|
|
|
Post by brad on Aug 19, 2012 6:53:53 GMT -6
I'm at home watching a John Wayne movie.
|
|
|
|
Post by Ratdog472 on Aug 19, 2012 7:47:56 GMT -6
I'll have to figure out how to pull them off.
|
|
|
|
Post by Tim-WT on Aug 19, 2012 7:51:30 GMT -6
I'm at home watching a John Wayne movie. Priceless... |
|
|
|
Post by brad on Aug 19, 2012 8:12:43 GMT -6
I'll have to figure out how to pull them off. I kid, I kid. If'n you pull them off and bring them to me, I'll CLEAN them free of charge. Bring me the bike.........50 bucks. |
|
|
|
Post by Ratdog472 on Aug 20, 2012 18:36:25 GMT -6
I have a sneaking suspicion that they are going to need a clean, rebuild, and sync when all is said and done.
|
|
|
|
Post by brad on Aug 20, 2012 19:35:12 GMT -6
Possibly
|
|
